Blog

2026/10/27 16:13

CUSTOM PARTSのご注文方法

好きな革を、好きな場所に。
マネークリップの各パーツに、好きな革とカラーを選べる「CUSTOM PARTS」。
ご注文は3ステップだけです。

Choose your leather. Make it your own. Ordering CUSTOM PARTS takes just 3 steps.


■ 最初に知ってほしい3つのこと

1. CUSTOM PARTSだけでは買えません。本体と一緒にカートへ入れてください。
2. 変えたいパーツだけ革を選びます。変えないパーツは「変更なし」でOKです。
3. 料金は、変えたパーツの分だけ追加になります。

■ ご注文の前に

CUSTOM PARTSは、マネークリップ本体への追加オプションです。
外装用と内装用で、商品ページが2つに分かれています。

▶ CUSTOM PARTS 01 - EXTERIOR(外装)

▶ CUSTOM PARTS 02 - INTERIOR(内装)

CUSTOM PARTS is an add-on for your money clip wallet, split into two pages: exterior and interior. It cannot be purchased on its own.


■ STEP 1 - まず本体を選ぶ

マネークリップ本体のページで、革とカラーを選びます。
本体そのもの(パーツA)の革は、ここで決まります。
本体だけのご注文も可能です。

Choose your leather and color on the money clip product page. The leather for Part A (the main body) is decided here.


■ STEP 2 - 変えたい場所のページを開く

変えたいパーツが外装か内装かで、開くページが変わります。

【01 EXTERIOR(外装)で選ぶパーツ】
・B - コインケースフラップ
・C - コインケース胴
・D - コインケースマチ左
・E - コインケースマチ右
・F - 背面カード収納
・G - コインケースフラップ裏

【02 INTERIOR(内装)で選ぶパーツ】
・H - 内装右
・I - 内装左
・J - 札留め右
・K - 札留め左

外装だけ、内装だけの変更もできます。

Open the page for the part you want to change: parts B–G on the EXTERIOR page, parts H–K on the INTERIOR page.


■ STEP 3 - パーツごとに革を選ぶ

ページの中で、パーツごとに革を選びます。

変えたいパーツ → 革を選ぶ
変えないパーツ → 「変更なし」を選ぶ

選んだ分だけが、標準仕様から変更されます。

Pick a leather for the parts you want to change, and select "No change" for the rest.


■ 札留めの選び方

内装の札留めは、左右どちらにも追加できます。

・Jだけ → 右側に札留め1つ
・Kだけ → 左側に札留め1つ
・J+K → 両側に札留め2つ(ロゴの刻印位置も選べます)
・どちらも選ばない → 標準仕様の札留め1つ

J: right side only. K: left side only. J + K: both sides, and you can also choose the logo stamp position.


■ 料金の仕組み

変更したパーツごとに、選んだ革に応じた追加料金が発生します。
変更しないパーツは、そのまま標準仕様で製作します。
革の組み合わせによっては製作できない場合があります。心配なときは、ご注文前にDMでご相談ください。

An additional charge applies for each part you change, depending on the leather. Some combinations may not be possible — feel free to ask us by DM before ordering.


■ ご注文の流れ

1. マネークリップ本体を選ぶ
2. 外装・内装のページで、パーツごとに革を選ぶ
3. 本体と一緒にカートに入れて注文する


■ 注文前のチェックリスト

□ 本体はカートに入っていますか?
□ 変えたいパーツには革を選んでいますか?
□ 変えないパーツは「変更なし」になっていますか?
□ 外装と内装、必要なページは両方見ましたか?

■ よくある質問

Q. CUSTOM PARTSだけ買えますか?
A. 買えません。マネークリップ本体と一緒のご注文が必要です。

Q. 一部のパーツだけ変えられますか?
A. 変えられます。変えないパーツは「変更なし」を選んでください。外装だけ、内装だけの変更もできます。

Q. 料金はどう決まりますか?
A. 変更したパーツごとに、選んだ革に応じた追加料金がかかります。変更しないパーツに追加料金はかかりません。

Q. 迷ったときはどうすればいいですか?
A. ご注文前にDMで気軽にご相談ください。革の組み合わせによっては製作できない場合も、先に確認できます。

最初に変えるなら、どのパーツにしますか?
迷ったときは、DMで気軽に相談してくださいね。

If you could change just one part first, which would it be? Ask us by DM anytime.

──────────────────
ENGLISH - HOW TO ORDER CUSTOM PARTS
──────────────────

Choose your leather. Make it your own.
With CUSTOM PARTS, you can pick the leather and color for each part of your money clip wallet. Ordering takes just 3 steps.

■ 3 things to know first

1. CUSTOM PARTS cannot be ordered on its own. Please order it together with a money clip wallet.
2. You only choose a leather for the parts you want to change. For the rest, select "No change".
3. You only pay extra for the parts you change.

■ Before you order

CUSTOM PARTS is an add-on option for your money clip wallet.
There are two product pages, one for the exterior and one for the interior.

▶ CUSTOM PARTS 01 - EXTERIOR

▶ CUSTOM PARTS 02 - INTERIOR

■ STEP 1 - Choose your money clip first

On the money clip product page, choose your leather and color.
The leather for Part A (the main body) is decided here.
You can, of course, order the money clip on its own.

■ STEP 2 - Open the page for the part you want to change

【Parts on 01 EXTERIOR】
・B - Coin case flap
・C - Coin case body
・D - Coin case gusset, left
・E - Coin case gusset, right
・F - Back card pocket
・G - Coin case flap lining

【Parts on 02 INTERIOR】
・H - Interior, right
・I - Interior, left
・J - Bill holder, right
・K - Bill holder, left

You can change the exterior only, or the interior only.

■ STEP 3 - Pick a leather for each part

On each page, select a leather for every part.
Parts you want to change → choose a leather.
Parts you keep → select "No change".
Only the parts you select will differ from the standard specification.

■ Bill holders

You can add a bill holder on either side of the interior.

・J only → one bill holder on the right
・K only → one bill holder on the left
・J + K → one on each side (you can also choose the logo stamp position, right or left)
・Neither → the standard single bill holder

■ About the price

An additional charge applies for each part you change, depending on the leather you choose.
Parts you leave unchanged will be made in the standard specification, at no extra charge.
Some leather combinations may not be possible. If you are unsure, feel free to ask us by DM before ordering.

■ Order flow

1. Choose your money clip wallet.
2. On the exterior / interior pages, pick a leather for each part.
3. Add everything to your cart together and check out.

■ Before you check out

□ Is the money clip wallet in your cart?
□ Did you choose a leather for every part you want to change?
□ Did you select "No change" for the parts you keep?
□ Did you check both pages, exterior and interior, if you need both?

■ FAQ

Q. Can I buy CUSTOM PARTS on its own?
A. No. It must be ordered together with a money clip wallet.

Q. Can I change only some parts?
A. Yes. Select "No change" for the parts you keep. Changing only the exterior, or only the interior, is also fine.

Q. How is the price decided?
A. An additional charge applies for each part you change, depending on the leather. Parts you do not change cost nothing extra.

Q. What if I cannot decide?
A. Feel free to ask us by DM before ordering. We can also check in advance whether your leather combination is possible.

If you could change just one part first, which would it be?
Ask us by DM anytime.

 

6T leatherworks

メールマガジンを受け取る